Coliform bacteria in well water: what a positive test means and what to do
Disclosure: We may earn a commission if you buy through links on this site, at no extra cost to you. It never changes what we recommend. How we make money.
A positive bacteria result is the one test result that should change what you do today. CDC advises that if your test shows harmful germs or chemicals, you consider drinking bottled water or another safe source and contact your local health or environmental department.[1]
What coliform bacteria are
Coliforms live in human and animal digestive systems, soil, plants and surface water. CDC says they "generally will not make you sick," but they get into water the same way as germs that do, such as from a sewage leak, and are much easier to test for.[1] If the total coliform count is high, CDC says harmful viruses, bacteria and parasites are likely also present.[1] Penn State Extension describes them as indicators that "a contamination pathway exists" between a bacteria source and the water supply.[2]
- Total coliform: the broad indicator group.
- Fecal coliform and E. coli: CDC says a positive result likely means feces, and the germs in it, have reached your well.[1] EPA notes fecal coliforms and E. coli come only from human and animal fecal waste.[3]
Symptoms
Bacteria usually have no taste, color or smell. EPA lists recurring gastrointestinal illness as a reason to test for coliform bacteria.[4] Penn State notes that household members may adapt to bacteria in their water while visitors get sick, and that symptoms overlap with many illnesses, so testing is the only way to know.[2]
Test to confirm
- Use the lab's sterile bottle and follow its instructions exactly.[2]
- Results come as present/absent or as a count (colonies per 100 mL). Penn State suggests asking for a count, and following a positive total coliform with an E. coli test.[2]
- Consider a confirmation sample before costly decisions.[2]
Standard: drinking water should contain no coliform bacteria, and fecal coliform and E. coli should be totally absent.[2] EPA's MCL goal for total coliforms is zero.[3]
The fix, in order
- Use a safe water source and call the health department.[1]
- Find and fix the pathway. Penn State lists extending a buried casing above ground, sloping the ground away, and installing a tight sanitary well cap; if E. coli is present, check the septic system and move animal waste away.[2] EPA's well-protection checklist covers the same items.[4]
- Shock chlorinate. A high concentration of chlorine for a short time can clear a one-time contamination, such as after a pump install or heavy rain. Penn State recommends having it done by a well professional and points to state instructions (such as Pennsylvania DEP's) and the National Ground Water Association.[5][2] Bypass treatment equipment that chlorine could damage.[5]
- Retest about 10 to 14 days later, then again in two to three months.[5]
- If bacteria return, add continuous disinfection that treats all water entering the home.[2]
Expectations: in a Penn State study, shock chlorination plus a sanitary cap kept bacteria away for a year in about 15% of contaminated wells, mostly those with fewer than 10 colonies per 100 mL and no E. coli.[5] So plan for the possibility of a permanent system.
Continuous disinfection options
| Type | Fits when | Watch out for |
|---|---|---|
| Ultraviolet (UV) light | Clear water; total coliform under 1,000 and fecal coliform under 100 colonies per 100 mL | Needs a sediment prefilter; hardness can scale the quartz sleeve; no residual disinfectant downstream; lamp replacement about yearly |
| Continuous chlorination | Higher counts, or when a residual is wanted | Needs about 30 minutes contact time (often a holding tank); chlorine demand rises with iron, hydrogen sulfide and organics; chemicals must be handled safely |
| Ozonation | Treating bacteria together with iron/manganese | Costlier than chlorination or UV |
All rows: Penn State Extension.[2] UV systems for disinfecting contaminated water are certified under NSF/ANSI 55 Class A.[6]
- Whole-house UV disinfection with sediment prefilterBest fit: Recurring coliform after shock chlorination; total coliform under 1,000 / 100 mL and fecal coliform under 100 / 100 mL; clear water [2]Look for: NSF/ANSI 55 Class A
- Continuous chlorination feed system + contact timeBest fit: Recurring coliform, or where a residual disinfectant is wanted [2]Look for: Professional install recommended
When to call a pro
- Any E. coli or fecal coliform result.[1]
- Shock chlorination: Penn State recommends a well professional.[2]
- After flooding: EPA advises having a contractor clean and disinfect the well before turning the pump back on.[4]
- Springs: shock chlorination is "difficult and rarely successful," and high-chlorine overflow can harm streams.[5]
What NOT to buy
- A UV unit without a prefilter, or for cloudy water. Sediment shields bacteria from the light.[2]
- A pitcher or carbon filter as a bacteria fix. Use a system certified for microbiological treatment, such as NSF/ANSI 55 Class A UV, or follow your health department's advice.[6]
- A permanent system before you fix the well cap and retest. Some contamination is one-time.[5]
Frequently asked questions
Is a positive total coliform test dangerous?
Coliforms are indicators. CDC says they generally will not make you sick, but they get into water the same way as germs that do; a high count suggests harmful germs are likely present. A positive E. coli or fecal coliform test likely means fecal contamination. Contact your health department.
How soon should I retest after shock chlorinating?
Penn State Extension recommends retesting for total coliform about 10 to 14 days after disinfection and again two to three months later. If bacteria return, continuous disinfection is needed.
Will a UV system fix coliform in my well?
UV is a common continuous disinfection option, but Penn State Extension says it is not recommended where total coliform exceeds 1,000 colonies per 100 mL or fecal coliform exceeds 100 per 100 mL, and the water must be clear.
Sources
- Guidelines for Testing Well Water — U.S. CDC (accessed November 18, 2026)
- Coliform Bacteria — Penn State Extension (accessed November 18, 2026)
- National Primary Drinking Water Regulations — U.S. EPA (accessed November 18, 2026)
- Protect Your Home's Water — U.S. EPA (accessed November 18, 2026)
- Shock Chlorination of Wells and Springs — Penn State Extension (accessed November 18, 2026)
- NSF Standards for Water Treatment Systems — NSF (accessed November 18, 2026)