Test Then Filter

Nitrate in well water: what the number means and what removes it

By Test Then Filter editorial team · Last reviewed · 5 sources

Disclosure: We may earn a commission if you buy through links on this site, at no extra cost to you. It never changes what we recommend. How we make money.

Nitrate has no color, taste or smell, which is why CDC says all well owners should test for it at least once a year.[1] It matters most if anyone in the home is an infant or pregnant.

What it is and where it comes from

CDC lists animal waste, septic systems, wastewater, flooded sewers, polluted stormwater runoff, fertilizers, farm runoff and decaying plants as sources.[1] Penn State Extension notes shallow wells and springs are particularly prone to nitrate contamination.[2] EPA recommends testing for nitrate, nitrite, pesticides and coliform bacteria if there is intensive agriculture nearby.[3]

Why it matters

EPA states that infants below six months who drink water with nitrate above the MCL "could become seriously ill and, if untreated, may die."[4] CDC says high nitrate levels can make people, and especially babies, sick, and that high nitrate may signal other harmful chemicals or germs in the water.[1] If your result is high, contact your local health department; CDC suggests bottled water or another safe source in the meantime.[1]

Levels and units

Nitrate and nitrite limits
ContaminantEPA MCLNote
Nitrate (measured as nitrogen)10 mg/L[4]Equivalent to 45 mg/L reported as nitrate[2]
Nitrite (measured as nitrogen)1 mg/L[4]Same infant risk

Check which form your lab reported. If it says "nitrate as nitrogen" (often written NO3-N), compare it with 10 mg/L; if it reports nitrate itself, the equivalent limit is 45 mg/L.[2] See How to read your water test results for more on units.

Match the treatment to your result

Penn State Extension lists ion exchange, reverse osmosis and distillation as treatments that remove nitrate, and says boiling does not.[2]

Nitrate treatment types (Penn State Extension)
TypeHow it fitsLimits
Reverse osmosis (point of use)Drinking and cooking water at one tapRejects an estimated 83 to 92% of nitrate, so very high levels may still exceed 10 mg/L after treatment; slow and wastes water
Anion exchange (nitrate-selective)Larger volumes or whole houseHigh sulfate reduces effectiveness; saturated resin can release nitrate; can make water corrosive; brine disposal
DistillationSmall daily volumesAbout a gallon every 4 to 5 hours; energy use; regular cleaning
Bottled waterShort term, or for infants and pregnant household membersPenn State calls it effective and low-cost for at-risk family members

All rows: Penn State Extension.[2] Reverse osmosis systems are certified under NSF/ANSI 58 and distillers under NSF/ANSI 62; check that the specific product's certification covers nitrate.[5]

Fix the source if you can

Penn State says preventing nitrate at the source works better than treating it long-term: check the septic system, make sure the well casing extends at least a foot above ground with a proper cap, divert surface runoff away from the well, and consider whether a deeper well is needed.[2]

When to call a pro

What NOT to buy

Frequently asked questions

Does boiling water remove nitrate?

No. Penn State Extension says boiling does not remove nitrate and actually increases its concentration as water evaporates.

My report says 45 mg/L nitrate. Is that over the limit?

It depends on how it is reported. Penn State Extension notes the standard is 10 mg/L of nitrate-nitrogen, which is equivalent to 45 mg/L of nitrate. Check which form your lab used.

How often should I test for nitrate?

CDC says all well owners should test for nitrates at least once every year.

Sources

  1. Guidelines for Testing Well Water — U.S. CDC (accessed November 18, 2026)
  2. Nitrates in Drinking Water — Penn State Extension (accessed November 18, 2026)
  3. Protect Your Home's Water — U.S. EPA (accessed November 18, 2026)
  4. National Primary Drinking Water Regulations — U.S. EPA (accessed November 18, 2026)
  5. NSF Standards for Water Treatment Systems — NSF (accessed November 18, 2026)