Test Then Filter

Test your water first. Then choose the filter.

By Test Then Filter editorial team · Last reviewed · 9 sources

Disclosure: We may earn a commission if you buy through links on this site, at no extra cost to you. It never changes what we recommend. How we make money.

The short version: a filter can only fix a problem it is designed for. Find out what is actually in your water with a certified lab test, then match the treatment type to the contaminant and its level. Guessing first is how people end up with an expensive system that does not solve the problem.

Why test first?

No single home system removes everything. NSF, which publishes voluntary standards for home water treatment systems, says certification to one of its standards "does not mean that a filter, purifier or treatment system will reduce all possible contaminants," and that you should check a system is certified for the contaminants that concern you.[1] Iron, hardness, bacteria and nitrate each need a different kind of treatment, and the right size or type often depends on the measured level. For example, Penn State Extension notes the iron concentration "will determine the most practical and economical water treatment options."[2]

Step 1: Which water do you have?

  • Private well
    You are responsible for testing. EPA says private well water quality is not regulated under the federal Safe Drinking Water Act, nor by most states.[3] CDC and EPA both recommend testing at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH.[4][5]
  • City (public) water
    Your utility already tests and publishes results in an annual Consumer Confidence Report, which you can look up through EPA.[6] Start there, then test at your own tap for issues that start in your home's plumbing, such as lead.[5]

Step 2: Start from the symptom

EPA publishes a chart that links common signs and nearby activities to what you should test for.[5] A shortened version:

What to test for, by symptom or situation (adapted from EPA)
What you noticeTest forOur guide
Orange, brown or black stains on fixtures or laundryIron, copper, manganeseIron & manganese
Scaly white deposits; soap won't latherHardnessHard water
Recurring stomach or intestinal illnessColiform bacteriaColiform bacteria
Intensive farming nearbyNitrate, nitrite, pesticides, coliform bacteriaNitrate
Objectionable taste or smell (such as rotten egg)Hydrogen sulfide, corrosion, metalsGuide coming soon
Lead plumbing or service linespH, lead, copperGuide coming soon
Corrosion of pipes or plumbingCorrosion, pH, leadGuide coming soon
Salty taste; seawater or heavily salted road nearbyChloride, total dissolved solids, sodiumReading results
Fuel odor; near a gas station or buried fuel tankVolatile organic compoundsAsk your health department

An odorless, clear glass of water is not proof it is safe. EPA notes that "odor-free water is not necessarily safe to drink."[7] That is why CDC and EPA recommend testing on a regular schedule, not only when something changes.[4][5]

Step 3: Get a real test

Use a laboratory certified for drinking water. EPA keeps a list of each state's laboratory certification program,[8] and EPA says your local health department may provide private well testing for free.[5] Our guide How to test your well water walks through what to order and when.

Step 4: Read the numbers

Results come in mg/L, ppm, ppb or grains per gallon, and each contaminant is compared with either a health-based federal limit (a maximum contaminant level, or MCL) or a non-enforceable "secondary" guideline for taste, color and staining.[9][7] See How to read your water test results for conversions and a table of EPA values.

Step 5: Match the treatment to the result

Guides on hydrogen sulfide (rotten-egg smell), lead, arsenic and PFAS are in progress. Until they are published, your state drinking water program or local health department is the best source of advice.

Sources

  1. NSF Standards for Water Treatment Systems — NSF (accessed November 18, 2026)
  2. Iron and Manganese in Private Water Systems — Penn State Extension (accessed November 18, 2026)
  3. Private Drinking Water Wells — U.S. EPA (accessed November 18, 2026)
  4. Guidelines for Testing Well Water — U.S. CDC (accessed November 18, 2026)
  5. Protect Your Home's Water — U.S. EPA (accessed November 18, 2026)
  6. Consumer Confidence Reports (CCR) — U.S. EPA (accessed November 18, 2026)
  7. Secondary Drinking Water Standards: Guidance for Nuisance Chemicals — U.S. EPA (accessed November 18, 2026)
  8. Contact Information for Certification Programs and Certified Laboratories for Drinking Water — U.S. EPA (accessed November 18, 2026)
  9. National Primary Drinking Water Regulations — U.S. EPA (accessed November 18, 2026)