How to test your well water
Disclosure: We may earn a commission if you buy through links on this site, at no extra cost to you. It never changes what we recommend. How we make money.
If your home has its own well, nobody else is testing your water. CDC puts it plainly: EPA's rules for public drinking water systems "do not apply to privately owned wells," and well owners are responsible for testing.[1] EPA adds that private well water quality is not regulated under the Safe Drinking Water Act, "nor by most state governments and laws."[2]
The annual baseline: four tests every year
CDC and EPA give the same minimum: test at least once a year for these four.[1][3]
| Test | Why it matters (per CDC) |
|---|---|
| Total coliform bacteria | An indicator: if counts are high, harmful germs such as viruses, bacteria and parasites are likely also present. A follow-up test for E. coli or fecal coliform checks for fecal contamination. |
| Nitrates | High levels can make people, and especially babies, sick. They can come from animal waste, septic systems, fertilizer and farm runoff. |
| Total dissolved solids (TDS) | Shows how much dissolved material (such as calcium or sodium) is in the water; affects taste and scale buildup. |
| pH | Water that is too acidic or too basic can damage pipes, and metals such as lead can leach from damaged pipes. |
Source for table rows: CDC.[1]
Add tests for your area and your situation
CDC recommends asking your local health or environmental department, or the EPA Safe Drinking Water Hotline at (800) 426-4791, whether you should also test for volatile organic compounds, lead, arsenic, mercury, radium, pesticides or herbicides, or other chemicals.[1] What to test for depends on where the well sits on your property, your state or region, and whether you live in a rural or urban area.[1]
EPA's checklist ties specific situations to extra tests.[3] A few examples:
- Stained fixtures or laundry: iron, copper, manganese. See Iron and manganese in well water: test, then match the filter.
- Scale, soap that won't lather: hardness. See Hard water: test your hardness, then decide if you need a softener.
- Intensive agriculture nearby: nitrate, nitrite, pesticides, coliform bacteria.
- Coal or other mining nearby: metals, pH, corrosion.
- Gas drilling nearby: chloride, sodium, barium, strontium.
- Landfill, junkyard, factory, gas station or dry cleaner nearby: VOCs, TDS, pH, sulfate, chloride, metals.
- Lead plumbing or service line: pH, lead, copper.
- Radon-rich region: radon.
CDC also advises spending time identifying likely problems first, because broad test panels "can be expensive."[1]
When to test right away (not just yearly)
CDC and EPA list these triggers for an extra test:[1][3]
- You learn of problems with well water or groundwater in your area.
- Conditions near the well change: flooding, land disturbance, new construction or industrial activity, or nearby waste disposal sites.
- You replace or repair any part of the well system.
- The water's taste, color or smell changes.
- Someone in the home becomes pregnant, or a child comes to live with you.
EPA adds that you may want to test more often if small children or older adults live in the home, or if someone is pregnant or nursing.[3] CDC also suggests checking the well every spring for mechanical problems.[1]
Certified lab or home test kit?
For results you will base a health or purchase decision on, use a certified lab. CDC says to "use a state-certified laboratory to test your water,"[1] and EPA says to "only use laboratories that are certified to do drinking water testing."[3] Lab reports give the concentration of each substance and often flag whether it exceeds a national primary or secondary standard.[3]
Quick home strips and meters can be useful for screening or for checking a treatment system between lab tests, but they are not a substitute for a certified lab result when health is at stake. Penn State Extension also recommends an independent lab test rather than relying on a water-treatment seller's free test, to "protect you from being oversold."[4]
How to find a state-certified lab
- Call your local health department first. EPA says it may provide private well testing for free,[3] and CDC says local or state departments often test for nitrates, total and fecal coliforms, VOCs and pH, and should have a list of certified labs.[1]
- Use EPA's state list. EPA's lab certification page links to a PDF of every state's laboratory certification program, where you can find certified labs.[5] (EPA itself does not test residential water on request.[5])
- Ask the lab for the right bottles. For bacteria, use the sterile bottle from the lab and follow its collection instructions exactly; a non-sterile container can introduce bacteria during sampling.[6]
Timing tips
- Bacteria results vary with weather. Penn State found coliform bacteria were more likely in wells after warm, wet weather and lower during cold, dry spells, so testing after several weeks of rain tends to catch the worst case.[6]
- If you are buying treatment equipment, test the raw (untreated) water first, and retest after installation to confirm it works.
Next step
Got your report back? Go to How to read your water test results.
Frequently asked questions
How often should I test my well water?
CDC and EPA recommend testing at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH, and testing again whenever something changes, such as flooding, well repairs, or a change in taste, color or smell.
Do I have to use a certified lab?
CDC says to use a state-certified laboratory, and EPA says to use only laboratories certified for drinking water testing. EPA publishes a list of state certification programs that link to certified labs.
Can my health department test my well?
Often, yes. EPA notes that your local health department may provide private well testing for free, and CDC says local or state health or environmental departments often test for nitrates, total coliforms, fecal coliforms, VOCs and pH.
Is the government responsible for testing my private well?
No. CDC says EPA's public drinking water rules do not apply to privately owned wells and that well owners are responsible for testing. Your local government can help you get it tested.
Sources
- Guidelines for Testing Well Water — U.S. CDC (accessed November 18, 2026)
- Private Drinking Water Wells — U.S. EPA (accessed November 18, 2026)
- Protect Your Home's Water — U.S. EPA (accessed November 18, 2026)
- Water Softening — Penn State Extension (accessed November 18, 2026)
- Contact Information for Certification Programs and Certified Laboratories for Drinking Water — U.S. EPA (accessed November 18, 2026)
- Coliform Bacteria — Penn State Extension (accessed November 18, 2026)